docker

Do you have any guide to setup solace/solace-pubsub-standard over SSL?
I am looking for a guide to setup the docker container solace/solace-pubsub-standard with SSL and/or test-containers The guide focuses on the non-authenticated version I tried generating a self-signed certificate and adding it to /usr/sw/jail/certs but I have been unable to connect using SSL. After ClientHello all I see is…
Fail to run solace in docker
"runParameters": -d -p 8080:8080 -p 5550:5550 -p 5672:5672 -e username_admin_globalaccesslevel=admin -e username_admin_password=admin -e system_scaling_maxconnectioncount=100 --shm-size=1g --entrypoint /usr/sbin/boot.sh I curl following api for health check, and got 503 http://127.0.0.1:5550/health-check/guaranteed-active…
Getting 401 when running discovery scan using event mgmt. agent installed on docker on Windows10
I am trying to install a docker container with the event management agent on my local Windows desktop (windows 10). This is the credential section of the agent YAML file: authentication: - properties: - value: basicAuthentication name: type protocol: semp credentials: - properties: - name: username value:…
I need help as Solace Pub Sub container is not coming as healthy if i use ENTRYPOINT or CMD
my docker file FROM solace/solace-pubsub-standard:latest EXPOSE 8080 55555 ADD configure_queue.sh /usr/local/bin/ ADD start.sh /usr/local/bin/ USER root RUN chmod +x /usr/local/bin/configure_queue.sh RUN chmod +x /usr/local/bin/start.sh ENTRYPOINT ["/usr/local/bin/start.sh"] start.sh #!/bin/bash /configure_queue.sh &…
Solace Docker Container Startup Time
Hey guys, Im currently working on a project with many microservices which communicate via solace. Therefore we startet writing integration tests using testcontainers. All other testcontainers start nearly instant (in like 1-2 seconds) only solace takes atleast 30 seconds to start - which reduces our performance in these…
arm64 on Linux
Hi, I'm exploring migration to arm64 architecture atm, but as soon as I publish my app for linux-musl-arm64 architecture and try to run it in Docker container based on Alpine 3.1 memory usage goes to 100% and container being killed by runtime. When switched back to x64 same code runs fine. Is Alpine supported at all for…
solace-pubsubplus is not getting installed in python:3.8.0-alpine3.10
Trying to install the solace-pubsubplus==1.6.0 into the python3.8.0-alphine3.10 inside the docker ERROR: Could not find a version that satisfies the requirement solace-pubsubplus==1.6.0 (from versions: 0.2.0, 0.2.1) ERROR: No matching distribution found for solace-pubsubplus==1.6.0 error building image: error building…
Docker will not work
Hello! I've been working with solace for a while now, and i've allways ran it localy on docker. I've switched to linux recently and a stange thing happened. Yesterday I was running solace ok on my machine, with docker, but today, I can not make it work. Nothing major has changed but solace just wont work on docker. This is…
Additional Solace PubSub+ logging [solace/solace-pubsub-standard]
Maybe it would be possible to add additional console log when solace event broker is ready for configuring ? For now we're searching for "Primary Virtual Router is now active" on /usr/sw/jail/logs/system.log which is making waiting complicated (executing grep/cat on this file in a loop instead of waiting for console log).
Solace docker pubsub Image for Apple silicon M1 Chip
I was not able to run the solace image on my M1 chip, is there any plan to release solace image for M1 chip. Even my organisation is planning to make use of M1 chip , Apple so they would be testing the solace image. Let me know if there is any plan.
Docker container failed to start with Windows Bind Mount
I am using Docker Desktop on Windows 10. I followed this guide to externalize the storage of docker container: https://docs.solace.com/Software-Broker/Container-Tasks/Config-Container-Storage.htm#Examples_of_Configuring_External_Storage The container is created but failed to start with last record in log: "Unable to raise…
Automatically run cli script during/after docker startup
Hello, is there a place or option somewhere that allows us to automatically run CLI scripts right after the startup completed ? The idea comes from PostgreSQL where you can create .sql files and place them in a specific path (here initdb.d) and they will get automatically executed. [...] If you would like to do additional…
Rootless Containers with Podman Now Supported in PubSub+ 10.1
Podman is a relatively new container runtime but, as the default in Red Hat Enterprise Linux 8 it is quickly gaining in popularity. PubSub+ 10.1 adds full support for Podman including running PubSub+ as a rootless container. For years Docker has been synonymous with containers; some security teams took issue with the fact…
Queue and consumer number limit with solace docker image
Hello, We are using solace image tagged (public.int.repositories.cloud.sap/solace/solace-pubsub-standard:9.13.1.38) in our CI. As it uses more memory ,this instance is shared across all the PRs in CI. We are using the default VPN for connection settings. is there a limit of 1000 queues and 1000 consumers on the open-source…
Timeout when using Docker on Arch Linux
Hello Solace community, I have a small problem when trying to run Solace PubSub+ on my docker instance. I already launched an instance on another computer with the same OS (probably not the same installed packages I can imagine) and it was working like a charm, but when I tried on this computer I just wasn't able to make…
Unable to setup HA group for event broker on Windows Docker
Hi I followed the guide for setting up HA group locally on my computer: When i run the docker start primary backup monitoring command the containers startup, but after 30-45 sec. the containers shutdown again. I created the network using the command: docker network create solace-net Create command for primary: docker…
Dockerfile custom entry point not working in 9+?
I am trying to create a Dockerfile with my VPN pre-populated through a configuration script called configure.sh. Dockerfile: FROM <hidden>/solace-pubsub-enterprise:9.12.1.17 ADD config /config ADD wait-for-it.sh /wait-for-it.sh ADD configure.sh /configure.sh ADD start.sh /start.sh USER root RUN chmod +x /wait-for-it.sh RUN…
Docker and AMQP (TryMe)
I am new to solace and have used docker to create solace container on my laptop. I am able to connect using "Try Me UI" with the address "ws://localhost:8008" and all works fine including sending messages, however, when i try connecting using AMQP protocol with the broker url "amqp://localhost:5672", it cannot establish…
PubSub Docker image fails to start in an LXC/LXD container
Hi, I have Docker installed in an LXC/LXD container and I'm trying to start Solace PubSub with the latest image (9.8.0.12). Unfortunately, I keep running into the Unable to raise event; rc(would block) error: Host Boot ID: cdbf8a80-964d-4368-9174-90d6a004189dStarting VMR Docker Container: Fri Jan 15 15:59:41 UTC…
'Message VPN' showing 'Down' status after docker restart
Hi there, I am taking over an old Solace VM setup for our proof of concept with the intent to productionize Solace at a later point. I see that the solace application was running on docker on an Azure VM with the below script and it seemed to be running fine. I've had to restart docker container recently and now I see that…
How to copy files to/from a Solace broker
This looks like a frequently asked question - so I try to list all options to transfer files to/from a Solace broker. Why do you need to transfer files ? This list are just some of the frequent use cases. * upload certificates (server cert, CA chains) to the broker * Download configuration backup files from the broker *…
Falling with Solace PubSub+ for Docker
Hi, I am trying to setup solace running in a docker container, when I started with the below commands. it is falling to start? Any help would be appreciated, please. sudo docker run -d -p 8080:8080 -p 55555:55555 --shm-size=2g --env username_admin_globalaccesslevel=admin --env username_admin_password=admin --name=solace…
Solace Docker Issue @ Windows Home
Hi, I'm trying to install docker on my Windows 10 Home desktop box, but unable install with following error. Please suggest any workaroud for this issue without upgrading my windows OS :) Thanks in advance! Kuladeep
Solace PubSub+ Event Broker Rootless
The Problem: Solace PubSub+ Event Broker software users have wanted to run PubSub+ containers rootless. This how-to aims to evaluate how to accomplish this with PubSub+ v9.4 and Podman from a container namespaces security stand point. What is Podman: Podman is a daemonless container engine. It is a drop-in replacement for…
NOt able to see message content on Try-Me on Solace on docker
I have solace running on docker and have used JMS API to send message to a queue (the topic named "dt' is subscribed to queue named "que1'). The event is received through the code as 2020-05-03 20:34:30:300 [Topic dt] Delivery Mode: Persistent Sender Timestamp: 2020-05-03 20:34:12:510 Priority: 4 But the conntent of…
container startup exception
Booting up solace container on openshift. Getting this error. Where is it trying to write to ? Trying to track down permission denied error here.. /usr/sw/data <- is writeable by container user id (it's mounted in container as emptyVolume) Starting solace process2020-05-15T11:51:15.237+00:00 <local0.info>…
Error running Solace under Kubernetes on WSL
Hello, I have been struggling to get Solace running under k8s on WSL. I have tried using the Helm templates here: https://github.com/SolaceProducts/pubsubplus-kubernetes-quickstart and using the Docker compose template here: https://github.com/SolaceLabs/solace-single-docker-compose In both cases the container stops with…
Error while running the VMR using docker on Ubuntu 18
Hi, I am facing this issue while starting up the VMR on Ubuntu 18. Has anyone faced and fixed this issue? Starting VMR Docker Container: Wed Oct 9 06:48:32 UTC 2019 SolOS Version: soltr_9.3.0.22 ssh-keygen: generating new host keys: RSA1 RSA DSA ECDSA ED25519 ** Unable to raise event; rc(would block)**
How to run Solace PubSub+ with unprivileged user
If you need to run Solace PubSub+ on docker but want to use unprivileged user, please take a look at the following sample command. docker run -d --user 1000 \-p 80:1080 -p 443:1443 -p 943:1943 \-p 8080:8080 -p 8443:8443 -p 8883:8883 -p 9000:9000 -p 9443:9443 \-p 2222:2222 -p 55555:55555 -p 1883:1883 -p 8000:8000…

docker

This Month's Leaders

This Week's Leaders

docker

Discussion List

This Month's Leaders

This Week's Leaders